AudioCodes Mediant 1000 User Manual page 782


To use a file template for automatic provisioning:
1. Define the file types to download by the file template, using the AupdFilesList
parameter. Use the keywords listed in the table below to specify each file type. For
example, to specify ini, Feature Key, and CPT files:
•
ini File:
AupdFilesList = 'ini', 'fk', 'cpt'
•
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# template-files-list ini,fk,cpt
2. Define the URL address of the provisioning server on which the files (specified in Step
1) are located for download, using the TemplateUrl parameter. When you configure
the URL, you must include the file type placeholder, "<FILE>", which represents the
file name. For each file type specified in Step 1, the device sends an HTTP request to
the server, where the placeholder in the URL is replaced with the filename and
extension, as listed in the below table. For example, if you configure the AupdFilesList
parameter as in Step 1 and the TemplateUrl parameter to:
•
ini File:
TemplateUrl = 'http://10.8.8.20/Site1_<FILE>'
•
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# template-url http://10.8.8.20/Site1_<FILE>
The device sends HTTP requests to the following URLs:
•
http://10.8.8.20/Site1_device.ini
•
http://10.8.8.20/Site1_fk.ini
•
http://10.8.8.20/Site1_cpt.data
3. Place the files to download on the provisioning server. Make sure that their file names
and extensions are based on the hardcoded string values specific to the file type for
the <FILE> placeholder (e.g., "Site1_device.ini" for the ini file), as shown in the table
below.
Table 45-2: File Template Keywords and Placeholder Values per File Type
File Type
ini file
CLI Script file
CMP file based on timestamp
Voice Prompts (VP) file
User Info file
CMP file
Feature Key file
Call Progress Tone (CPT) file
Prerecorded Tones (PRT) file
CAS file
Dial Plan file
User's Manual
Keywords for
Template File
ini device.ini
cli cliScript.txt
acmp autoFirmware.cmp
vp vp.dat
usrinf userInfo.txt
cmp firmware.cmp
fk fk.ini
cpt cpt.dat
prt prt.dat
cas cas.dat
dpln dialPlan.dat
782
Mediant 1000B Gateway & E-SBC
Value Replacing
<FILE> Placeholder
Document #: LTRT-27045