AudioCodes Mediant 1000 User Manual page 308

Parameter
Action
Rule Action
rule-action
[QualityOfServiceRules_RuleActi
on]
Calls Reject Duration
calls-reject-duration
[QualityOfServiceRules_CallsRej
ectDuration]
Alternative IP Profile Name
alt-ip-profile-name
[QualityOfServiceRules_AltIPProf
ileName]
User's Manual
to any value.
Defines the action to be done if the rule is matched.

[0] Reject Calls = (Default) New calls destined to the specified
IP Group are rejected for a user-defined duration. To configure
the duration, use the 'Calls Reject Duration' parameter (see
below).

[1] Alternative IP Profile = A different IP Profile is used for the
IP Group or call (depending on the 'Rule Metric' parameter).
To specify the IP Profile, use the 'Alternative IP Profile Name'
parameter (see below).
Note:

If you configure the 'Rule Metric' parameter to ACD, ASR or
NER, you must configure the parameter to Reject Calls.

If you configure the 'Rule Metric' parameter to Voice Quality
or Bandwidth:

If you configure the 'Severity' parameter to Minor, you
must configure the parameter to Alternative IP Profile.

If you configure the 'Severity' parameter to Major, you can
configure the parameter to any option.
When configured to Alternative IP Profile and the threshold is
crossed, the device changes the IP Profile for the entire IP
Group for all new calls.

If you configure the 'Rule Metric' parameter to Poor InVoice
Quality, you must configure the parameter to Alternative IP
Profile. If the threshold is crossed (i.e., poor call quality), the
device changes the IP Profile for the specific call only (during
the call).
Defines the duration (in minutes) for which the device rejects calls
to the IP Group if the rule is matched.
The default is 5.
Note: The parameter is applicable only if the 'Rule Action'
parameter is configured to Reject Calls.
Assigns a different IP Profile to the IP Group or call (depending
on the 'Rule Metric' parameter) if the rule is matched.
By default, no value is defined.
Note: The parameter is applicable only if the 'Rule Action'
parameter is configured to Alternative IP Profile.
308
Mediant 1000B Gateway & E-SBC
Description
Document #: LTRT-27045