AudioCodes Mediant 1000 User Manual page 804

Tab
RTP/RTCP Channel Identifier
RTP Direction
Local UDP Port
Remote IP Addr
Remote UDP Port
Rx Octet Count
Tx Octet Count
Network Jitter
Roundtrip Delay
Packet Loss
Remote RTCP CName
Voice Channel Identifier
Settings
Coder
Frame Duration
Echo Canceller
Silence Suppression
Input Gain
Voice Volume
DTMF Transport Type
Enabled Detectors
Fax Transport Type
User's Manual
Field

Note: The parameter is applicable only to analog
interfaces.
Channel identifier number.
Direction of RTP:

Local UDP port on the device.
IP address of the remote IP side.
Port of the remote IP side.
Total number of received packets.
Total number of transmitted packets.
Network jitter (in msec).
Round-trip delay time (in msec).
Packet loss (in %).
Channel ID.
See ''Configuring Coder Groups'' on page 385.
Frame duration (in msec).
See ''Configuring Echo Cancellation'' on page
178.
See ''Configuring Silence Suppression'' on page
177.
See ''Configuring Voice Gain (Volume) Control''
on page 177.
See ''Configuring Voice Gain (Volume) Control''
on page 177.
See ''Configuring DTMF Transport Types'' on
page 191.
Detectors (e.g., AMD).
See ''Fax and Modem Capabilities'' on page 178.
804
Mediant 1000B Gateway & E-SBC
Description
"1": On
"Tx & Rx": both directions (transmit and
receive)
Document #: LTRT-27045