Viewing Registration Status - AudioCodes Mediant 1000 User Manual

User's Manual
51.4

Viewing Registration Status

You can view the registration status of the device's endpoints (FXS, FXO and BRI) and SIP
Accounts. The registration mode (i.e., per device, endpoint, account. or no registration) is
configured in the Trunk Group Settings table (see Configuring Trunk Group Settings on
page 467) or using the TrunkGroupSettings ini file parameter.

To view registration status:

Open the Registration Status table (Monitor menu > Monitor tab > VoIP Status
folder > Registration Status).
Parameter
Registered Per Gateway
Ports Registration Status
Accounts Registration Status
Phone Number Status
Version 7.2
Table 51-4: Registration Status Table Description
Registration status of the device as one entity:

"YES"

"NO"
Note: The parameter is applicable only to the Gateway
application.
Displays the registration status per analog (FXS or FXO)
port:

"REGISTERED"

"NOT REGISTERED"
Displays the status registration per Account, as configured in
the Accounts table (see ''Configuring Registration Accounts''
on page 361).

Group Type: Served Trunk Group or IP Group

Group Name: Name of served Trunk Group or IP Group,
if applicable

Status: "REGISTERED" or "NOT REGISTERED"
Displays the registration status of BRI endpoints:

Phone Number: Phone number of endpoint.

Gateway Port: module/port number of endpoint.

Status: "REGISTERED" or "NOT REGISTERED"
Description
825 Mediant 1000B Gateway & E-SBC
51. Viewing VoIP Status