Configuring Ip Profiles - AudioCodes Mediant 1000 User Manual

User's Manual
located below the table; the Allowed Video Coders table opens.
6. Click New; the following dialog box appears:
Figure 19-5: Allowed Video Coders Table - Add Dialog Box
7. Configure coders for the Allowed Video Coders Group according to the parameters
described in the table below.
8. Click Apply.
Table 19-4: Allowed Video Coders Groups and Allowed Video Coders Tables Parameter
Parameter
Allowed Video Coders Groups Table
Index
allowed-video-coders-groups <index>
[AllowedVideoCodersGroups_Index]
Name
coders-group-name
[AllowedVideoCodersGroups_Name]
Allowed Video Coders Table
Index
allowed-video-coders <group index/coder index>
[AllowedVideoCoders_AllowedVideoCodersIndex]
User Define Coder
user-define-coder
[AllowedVideoCoders_UserDefineCoder]
19.4

Configuring IP Profiles

The IP Profiles table lets you configure up to 40 IP Profiles. An IP Profile is a set of
parameters with user-defined settings relating to signaling (e.g., SIP message terminations
such as REFER) and media (e.g., coder type). An IP Profile can later be assigned to
specific IP calls (inbound and/or outbound). Thus, IP Profiles provide high-level adaptation
Version 7.2
Descriptions
Defines an index number for the new table row.
Note: Each row must be configured with a unique
index.
Defines an arbitrary name to easily identify the
row.
The valid value is a string of up to 41 characters.
Note: Each row must be configured with a unique
name.
Defines an index number for the new table row.
Note: Each row must be configured with a unique
index.
Defines a user-defined coder.
The valid value is a string of up to 24 characters
(case-insensitive). For example, "HD.123"
(without quotes).
Note: Each coder can be configured only once
per Allowed Video Coders Group.
393
19. Coders and Profiles
Description
Mediant 1000B Gateway & E-SBC