AudioCodes Mediant 1000 User Manual page 844

CDR Field
SessionId Unique Session ID
LegId Unique ID number of the call leg within a
specific call session.
A basic call consists of two legs (incoming
leg and outgoing leg) and thus, two leg
IDs are generated for the session, one for
each leg.
For each new call, the device assigns leg
ID "1" to the first leg. The device then
increments the leg ID for subsequent legs
according to the leg sequence in the call
session. For example, the device
generates leg ID "1" for the incoming leg
and leg ID "2" for the outgoing leg. If the
call is transferred, the device generates
leg ID "3" for the leg belonging to the call
transfer target. Another example is a call
forking session where the leg ID
sequence may be as follows: incoming leg
is "1", outgoing leg to user's office phone
is "2" and outgoing leg to the user's
mobile phone is "3". If the call is then
transferred, the leg ID for the transfer leg
is "4".
Orig Call originator:


SourceIp Source IP address
SourcePort Source UDP port
DestIp Destination IP address
DestPort Destination UDP port
TransportType Transport type:



SrcURI Source URI
User's Manual
Description
"LCL": local
"RMT": remote
"UDP"
"TCP"
"TLS"
Mediant 1000B Gateway & E-SBC
CDR Report Type
(SBCReportType)
All
"CALL_START",
"CALL_CONNECT"
and "CALL_END"
All
All
All
All
All
All
All
844
Format
String (up to
10
characters)
String
(decimal)
String
String (up to
20
characters)
String (up to
10
characters)
String (up to
20
characters)
String (up to
10
characters)
String
String (up to
41
characters)
Document #: LTRT-27045