Viewing Information Of Installed Dial Plan File - AudioCodes Mediant 1000 User Manual

User's Manual
; number range that changes to 04343434181.
056788118[2-4],0,04343434181
If we take the first Dial Plan rule in the example (i.e., "0567811181,0,04343434181"), the
received Calling Number Party of 0567811181 is changed to 04343434181 and sent to the
IP with a SIP INVITE as follows:
Via: SIP/2.0/UDP 211.192.160.214:5060;branch=z9hG4bK3157667347
From: <sip:04343434181@kt.co.kr:5060>;tag=de0004b1
To: sip:01066557573@kt.co.kr:5060
Call-ID: 585e60ec@211.192.160.214
CSeq: 1 INVITE
Contact:<sip:04343434181@211.192.160.214:5060;transport=udp>

To modify ISDN Calling Party Number using Dial Plan File:
1. Create a text-based Dial Plan file containing your configuration (see above for syntax).
2. Convert the Dial Plan file to *.dat file format using the DConvert utility. This is done by
clicking the DConvert's Process Dial Plan File button. For more information, refer to
DConvert Utility User's Guide.
3. Load the Dial Plan file in *.dat format to the device.
4. Specify the Dial Plan (by index number) that you want to use, using the
Tel2IPSourceNumberMappingDialPlanIndex ini file parameter.
Note:
•
Tel-to-IP routing is performed on the original source number if the parameter 'Tel
to IP Routing Mode' is set to 'Route calls before manipulation'.
•
Tel-to-IP routing is performed on the modified source number as defined in the
Dial Plan file, if the parameter 'Tel To IP Routing Mode' is set to 'Route calls after
manipulation'.
•
Source number Tel-to-IP manipulation is performed on the modified source
number as defined in the Dial Plan file.

43.1.7.6 Viewing Information of Installed Dial Plan File

You can view information about the Dial Plan file currently installed on the device, through
the device's CLI:

Viewing Dial Plan file information: You can view the file name of the installed Dial
Plan file and the names of the Dial Plans defined in the Dial Plan file, by entering the
following CLI command (in Enable mode):
# debug auxilary-files dial-plan info
For example, the following shows the file name of the installed Dial Plan file and lists
its Dial Plans:
# debug auxilary-files dial-plan info
File Name: MyDialPlan.txt
Plans:
Plan #0 = PLAN1
Plan #1 = PLAN2
Note that the index number of the first Dial Plan is 0.

Searching a prefix number: You can check whether a specific prefix number is
defined in a specific Dial Plan (and view the corresponding tag if the Dial Plan
implements tags), by entering the following CLI command (in Enable mode):
Version 7.2 753 Mediant 1000B Gateway & E-SBC
43. Software Upgrade