Deleting Alarm Campaigns; Deleting A Single Alarm Campaign; Deleting All Alarm Campaigns; Trend Mode - AEMC PowerPad III 8336 User Manual

5.4.7 DELETING ALARM CAMPAIGNS

5.4.7.1 DELETING A SINGLE ALARM CAMPAIGN

When the list of campaigns performed is displayed (see Figure 5-42), select the campaign to be deleted by moving the
cursor to it using the up and down arrow buttons. The selected campaign is bolded. Then press the
to confirm the deletion or
NOTE: You cannot delete an alarm campaign in progress.

5.4.7.2 DELETING ALL ALARM CAMPAIGNS

Erasing all alarm campaigns from memory is performed via the Configuration menu, in the Erase Memory sub-menu (see
§ 4.1.9).

5.5 TREND MODE

5.5.1 PROGRAMMING AND STARTING A RECORDING

The Trend mode records changes to parameters previously specified in Trend mode configuration screen (see §
4.1.7). Pressing this button displays the Recording Schedule screen.
Item Function
1
Memory card usage
2
Rapid programming and starts a recording
3
Shortcut to the Trend Mode configuration screen
4
Displays a list of recordings
5
Programs a recording
6
Starts a recording
The screen specifies the characteristics of a recording (see Figure 5-44). To quickly start a recording, press the
button. Recording starts immediately; all measurements are recorded every second until the memory or completely full.
The configuration displayed is
74
to cancel.
1
2
3
.
Figure 5-44
button. Press
4
5
6
Power Quality Analyzer PowerPad III Model 8336
®