Measurement Of The Peak Factor (Cf); Cf (3U) - AEMC PowerPad III 8336 User Manual

Item Function
1 Instantaneous value cursor; change values with the cursor using the ◄ and ► buttons
2
Harmonic distortion rate for each curve
Instantaneous value of the signals at the intersection of the cursor and the curves
t: time relative to the start of the period (expressed in milliseconds)
A1: instantaneous current of phase 1
3
A2: instantaneous current of phase 2
A3: instantaneous current of phase 3
AN: instantaneous value of the neutral current
Note: Filters L1, L2, L3 and N display the total current and voltage harmonic distortion for phases 1, 2, and 3, and the
neutral channel respectively.

5.3.3 MEASUREMENT OF THE PEAK FACTOR (CF)

The CF sub-menu displays the waveforms of the signals measured over one period and the voltage and current peak factors.

5.3.3.1 CF (3U)

This screen displays the phase-to-phase voltage waveforms of one period and the peak factors.
Item Function
1 Instantaneous value cursor; change values with the cursor using the ◄ and ► buttons
2
Peak factor for each curve
Instantaneous value of the signals at the intersection of the cursor and the graphs
t: time relative to the start of the period (expressed in milliseconds)
3 U1: instantaneous voltage peak factor between phases 1 and 2 (U
U2: instantaneous voltage peak factor between phases 2 and 3 (U
U3: instantaneous voltage peak factor between phases 3 and 1 (U
Power Quality Analyzer PowerPad
1
III Model 8336
®
02/06/14
Figure 5-34
)
12
)
23
)
31
2
3
65