List Of Alarms - AEMC PowerPad III 8336 User Manual

5.4.6 LIST OF ALARMS

To select a campaign, move the cursor to it using the ▲ and ▼ arrow buttons. The selected field is bolded. Then validate
with the button. The instrument then displays the alarms in list form.
Item Function
1 Alarm date and time
2 Target of alarm detected
3 Type of alarm detected
4 Minimum or maximum (configuration dependent) of alarm detected
5 Dynamic filter (connection type dependent)
If an alarm duration is displayed in red, it was cut short for one of the following reasons:
● Power supply problem (battery low)
● Manual stoppage of the campaign by pressing
● Memory is full
● Measurement error
● Incompatibility between the quantity monitored and the configuration of the instrument (for example withdrawal of
a current sensor)
In the last two cases, the minimum or maximum (whichever is applicable) s also displayed in red. To return to the
Detection List screen, press
Power Quality Analyzer PowerPad
1
.
III Model 8336
®
2 3 4
Figure 5-43
or by turning the instrument OFF
5
73