Trend Mode - AEMC PowerPad III 8336 User Manual

4.1.7 TREND MODE

The instrument has a recording function (activated by the
values (Urms, Vrms, Arms, and so on). To display the Trend Mode menu, press
and then select .
The Trend Mode menu consists of two pages. The first page is illustrated in Figure 4-19. To display the next page, press
the button.
There are four possible programmable configurations:
configurations, press the
To select a parameter to be recorded, move the yellow cursor to the parameter using the navigation arrow buttons, then
press . Selected parameters are identified by a red spot. The frequency (Hz) is always selected (black spot).
NOTE: If a quantity is displayed in red, it is incompatible with the configuration chosen (connection selected, sen-
sors connected, ratios programmed, reference of the level of harmonics of the phases, breakdown of the non-active
quantities). For example, if no current sensor is connected, all current quantities appear in red.
To select all of the parameters of a page, press the
button.
To change configuration pages, press the
34
or button.
button. To deselect all of the parameters of a page, press the
or button.
button, see § 5.5), used to record measured and calculated
Figure 4-19
Figure 4-20
, , ,
to display the Configuration menu,
. To navigate through these
Power Quality Analyzer PowerPad III Model 8336
®