AEMC PowerPad III 8336 User Manual page 51

- t: relative time position of the cursor
4 (t = 0 corresponds to the start of the Inrush capture)
- Values at the position of the cursor. In the example shown in Figure 5-9, A1, A2, and A3 are the RMS values of currents 1, 2, and 3.
: Zoom Out - Zooms out on the graph at the current cursor position
5
: Zoom In - Zooms in on the graph at the current cursor position
3A RMS DISPLAY SCREEN (3-PHASE CONNECTION WITHOUT NEUTRAL)
L1 RMS DISPLAY SCREEN FOR A 3-PHASE CONNECTION WITH NEUTRAL
NOTE: Filters L2 and L3 are used to display the recording of the true half-cycle RMS current and voltage of phases
2 and 3. The screen is identical to the one displayed for filter L1.
The , ,
current value.
48
, and buttons are used to go to the first occurrence of a minimum or maximum voltage or
Figure 5-10
Figure 5-11
Power Quality Analyzer PowerPad III Model 8336
®