Alarm Mode - AEMC PowerPad III 8336 User Manual

5.4 ALARM MODE

The Alarm mode detects overshoots of thresholds on each of the following parameters:
Hz |Upk-|
Urms |Vpk-|
Vrms |Apk-|
Arms Ucf
|Udc| Vcf
|Vdc| Acf
|Adc| Uthdf
|Upk+| Vthdf
|Vpk+| Athdf
|Apk+|, Uthdr
(See also the table of abbreviations in § 8.3)
The alarm thresholds must:
● have been programmed in the Configuration / Alarm mode screen (see § 4.1.8)
● be active (marked with a red spot on that same screen)
NOTE: Stored alarms can subsequently be transferred to a PC via the DataView data analysis program (see § 6).
You can capture over 16,000 alarms.
When the Alarm mode button
Item Measurement Type
Displays the Alarm mode configuration sub-menu
Displays alarm campaigns
Programs an alarm
Validates the programming of an alarm (after
Manually stops an alarm that is in progress
70
Vthdr
Athdr
|P|
|Pdc |
|Q1| or N
D
S
|PF|
|cos Φ
|tan Φ
. is pressed, the Detection Schedule screen will appear:
is selected, the
PST
PLT
FHL
FK
Vunb (or Uunb for a 3-phase source without neutral)
Aunb
U-h
V-h
A-h
|S-h|
Figure 5-40
icon appears)
Power Quality Analyzer PowerPad III Model 8336
®