2
press
nd
on
3
press
rd
on
4
press
th
on
5
press
th
on
6
press
th
on
2.1.2 alarms
The instrument includes an alarm function that sounds an audible buzzer when a
defined alarm condition is measured.
2.1.2.1 activating/Deactivating the alarm function
TEST
Megohmmeter Model 6536
Shop for Data Logging products online at:
P
The alarm function is available in insulation, resistance, and
continuity measurement modes. Pressing the
activates the alarm. The
with the threshold value.
www.
Automatic switching to standby
mode is activated. To deactivate it:
1. Press to select OFF (the
setting blinks).
2. Press to change the
setting to On.
3. Press to validate the
change.
P
The
symbol appears on the
display when you exit Set-Up.
Note that this setting reverts to OFF
when you turn OFF the instrument.
Displays the instrument model
number.
Displays the instrument firmware
version.
Displays the instrument hardware
version.
Return to the first press.
symbol appears on the LCD, along
DataLoggerStore
button
11
1.877.766.541
.ca