AEMC PowerPad III 8336 User Manual page 39

The last four entries in the preceding table (U-h, V-h, A-h, and S-h) involve the recording of the harmonics of U, V, A, and
S. You can select a range of orders of the harmonics to be recorded (between 0 and 50) for each of these quantities; and
within this range (if desired) only odd harmonics.
NOTE: The level of harmonics of order 01 will be displayed only if they concern values expressed in % r.
To change an order of harmonic:
1. Select the parameter to be recorded (identified by a red spot).
2. Move the yellow cursor to the parameter using the navigation arrow buttons.
3. Confirm the selection by pressing
4. Change the value using the ▲ and ▼ arrow buttons, then confirm by pressing
NOTE: If a recording is in progress, the associated configuration cannot be modified and the selected values are
identified by black spots.
To return to the Configuration menu, press
36
.
Figure 4-21
.
.
Power Quality Analyzer PowerPad III Model 8336
®