Display Modes; Waveform Capture Mode - AEMC PowerPad III 8336 User Manual

5. DISPLAY MODES

To select parameters in all modes, use the ◄ ►▲▼ buttons to move to the desired parameter and use the button to
confirm selections.

5.1 WAVEFORM CAPTURE MODE

The Waveform capture menu enables you to display and to capture transients and inrush currents. It contains two sub-
modes:
■ Transient mode (see § 5.1.1)
■ Inrush current mode (see § 5.1.2)
Figure 5-1
To select the sub-mode, highlight either Transient or Inrush current using the ▲ and ▼ buttons, then press .
To return to the Waveform Capture screen, press .
40
Power Quality Analyzer PowerPad III Model 8336
®