Pid Motorized Potentiometer; Pid Fixed Setpoint - Siemens SINAMICS G120 Operating Instructions Manual

Functions
8.12 PID Controller
8.12.1

PID motorized potentiometer

Data
Parameter range:
Warnings:
Faults:
Function chart number:
Description
The PID controller has a PID motorized potentiometer (PID-MOP) which can be separately
adjusted. The functionality is identical with the motorized potentiometer, whereby the PID
parameters are emulated in the range from P2231 ... r2250.
Table 8-21
PID motorized potentiometer
P2231[3]
P2232
P2235[3]
P2236[3]
P2240[3]
r2250
For more detail refer to Section "Motorized potentiometer (MOP)" in this Chapter.
8.12.2

PID fixed setpoint

Data
Quantity:
Parameter range:
Warnings:
Faults :
Function chart number:
8-54
Correspondence between the parameters
Setpoint memory of PID-MOP
Inhibit rev. direct. of PID-MOP
BI: Enable PID-MOP (UP-CMD)
BI: Enable PID-MOP (DOWN-CMD)
Setpoint of PID-MOP
CO:Output setpoint of PID-MOP
P2231 ... r2250
-
-
FP3400
Motorized potentiometer
P1031[3] Setpoint memory of the MOP
P1032 Inhibit reverse direction of MOP
P1035[3] BI: Enable MOP (UP command)
P1036[3] BI: Enable MOP (DOWN command)
P1040[3] Setpoint of the MOP
r1050 CO: Act. output freq. of the MOP
15
P2201 ... P2225
-
-
FP3300, FP3310
Operating Instructions, 11/2006, A5E00766042B AA
Control Units CU240S