Siemens SINAMICS G120 Operating Instructions Manual page 45

DIP switch Settings
The general I/O DIP switches 1 and 2 are used to configure the analog inputs (AI). For using
AI0 and AI1 as voltage inputs set DIP switches 1 and 2 to OFF position.For detailed
information refer to "Analog input" in section "Function".
Parameter Settings
No additional parameters require to be modified.
Figure 4-6
Control Units CU240S
Operating Instructions, 11/2006, A5E00766042B AA
Terminal connection for using AI0 and AI1 as voltage inputs for main and
additionalsetpoint
4.2 Connecting the Control Unit via terminals
Installing/Mounting
4-7