Siemens SINAMICS G120 Operating Instructions Manual page 44

Installing/Mounting
4.2 Connecting the Control Unit via terminals
Figure 4-5
Frequency setpoint and an additional setpoint via terminals
AI0 and AI1 used as voltage inputs
This type of control wiring allows a main frequency setpoint and an additional setpoint to be
established, using potentiometers on analog inputs AI0 and AI1.
The figure below shows the wiring that is necessary to accomplish this functionality.
4-6
Default control wiring of a CU240S
Operating Instructions, 11/2006, A5E00766042B AA
Control Units CU240S