Description
3.5 Interfaces of the CU240S variants
PROFIBUS DP DIP switches (CU240S DP and CU240S DP-F)
The PROFIBUS DP address can be set via seven DIPswitches or via parameter "P0918". If
an address is set via DIP switches, the value of p0918 will be ignored. The PROFIBUS DP
address can be set between 1 and 125.
In the factory setting the PROFIBUS DP address DIP switches are in the OFF position.
Figure 3-8
Table 3-5
DIP switch
Add to address
Example 1: Address = 3 = 1 + 2
Example 2:
Address = 88 = 8 + 16 + 64
Status display via LEDs
The SINAMICS G120 inverters provide multiple functions and operating states which are
indicated via LEDs.
LEDs for standard CUs
The status for standard inverters is displayed via the following LEDs:
Figure 3-9
3-14
PROFIBUS address DIP switches
Example address for the PROFIBUS DP interface
Status LEDs for standard inverters
1
2
3
1
2
4
Operating Instructions, 11/2006, A5E00766042B AA
4
5
6
8
16
32
Control Units CU240S
7
64