Electric Seat Tilt - Otto Bock Skippi Plus Service Manual

Service Work
Telescoping the footrest receivers
The footrest receivers of the Skippi Plus can be telescoped in the transverse direction indepen-
dently from each other. Each side can be telescoped outwards continuously by 60 mm/2,4". For
setting the footrest receivers, you first have to loosen one of the two screws at the front of the
seat frame using a size 5 Allen wrench.
Fig. 22 Telescoping the footrest receiver

6.9 Electric seat tilt

The electric seat tilt can be added to the Skippi Plus at any time.
First remove the manual seat tilt mechanism. Fold away the securing bow and pull the bolt out of
the respective bore hole (see section 6.5). Then unscrew the seat angle adjustment mechanism
from the upper attachment, below the seat plate, using two size 5 Allen wrenches.
Apply the actuator of the electric seat tilt so that the upper end with the cables fits the attach-
ment below the seat plate and tighten the screw connection.
Fig. 23 Electric seat tilt
28 | Ottobock Skippi Plus