Otto Bock Skippi Plus Service Manual page 31

A
Fig. 26 Attaching the assembly unit to the base frame and Installed/lifted seat height adjustment
4. Remove the retaining bar for the controller and install the alternative retaining bar (see item D).
Here you need a size 6 Allen wrench.
5. Before you are able to install the adjustment motor, you have to fix the holding device to the
base frame with six oval head screws with Allen head (see item E). Here you need a size 5
Allen wrench.
Fig. 27 Installed retaining bar for the controller
Fig. 28 Adjustment motor (actuator), complete / Installed holding device
Skippi Plus
A
B
B
D
F
D
E
E
Service Work
C
Ottobock | 31