Service Work; Control Unit - Otto Bock Skippi Plus Service Manual

Display symbol

6 Service Work

6.1 Checking the general condition
Check all safety-related components for corrosion, repair if required and reapply corrosion
U
protection.
Check weld seams.
U
Check tightness of screw connections; replace thread-locking compound if required; observe
U
any defined torque specifications; replace defective screws (e.g. in case of corrosion).
Check cables for ruptures, signs of wear and proper attachment; replace defective components.
U
Check cable connections and plug connections.
U

6.2 Control unit

With the Enable 50 control unit, the Skippi Plus can show causes of error messages on the
display. Error sources in the drive section and in the electric options are indicated by flashing of
the corresponding sections in the display's pictograph.
The handheld programming device can be used to change the parameters.
Control panel holder
There is only one control panel variant available for the Skippi Plus power wheelchair for children.
Four screws fasten the control panel to a holding element with spring sheet metal. You need
an Allen wrench to loosen these screws. Now the control panel can be easily inserted in and
removed from the control panel holder.
Skippi Plus
LCD monitor display Function
Power back angle adjustment
Power seat tilt
Drive-away lock
Creep speed
Attendant control
Service Work
Ottobock | 17