Controller; Connecting The Controller - Otto Bock Skippi Plus Service Manual

3
4
Fig. 55 Components of the enAble50 wheelchair control
1 Attendant control
2 Hand-held control unit

3 Controller

4 Separate LCD monitor
8.2 Controller
The controller is attached to the wheelchair with two screws (see section 6.4).
Fig. 56 Controller

8.2.1 Connecting the controller

The illustration below shows the wiring of the enAble50 controller for a system that has drive
motors equipped with encoders.
Skippi Plus
enAble50 wheelchair control – installation and programming
2
1
Ottobock | 51