Otto Bock Skippi Plus Service Manual page 27

Fig. 19 Footrest with unlock lever
By loosening the screws on the telescoping footrest tube at the top and bottom, the footplate
can be adapted to the lower leg length and to the thickness of the child's seat cushion.
To set the lower leg length you need a size 3 Allen wrench.
Fig. 20 Adjusting the lower leg length
Ensure that the telescoping tubes of both footrests are set equally. Use a folding ruler, if necessary.
The angle of the footplate can be changed by loosening the attachment screw on the rear side
of the footrest bar. Again, you need a size 3 Allen wrench.
Fig. 21 Setting the angle
Make sure to firmly retighten the screw connections after all adjustments.
Skippi Plus
Service Work
Ottobock | 27