Turning Switches On/Off - Otto Bock Skippi Plus Service Manual

Hide thumbs Also See for Skippi Plus:

Table of Contents

Push-button module

Fig. 48

Icons for the push-button module

6.17.2 Turning switches on/off

The push-button module has five switches which are responsible for various functions depend-

ing on the configuration.

When all five switches are active, the switching sequence is 1-2-3-4-5-1-2... The switches can

be activated or deactivated according to the preferences of the user. If switches 4 and 5 are

deactivated, for example, the new switching sequence is 1-2-3-1-2...

Preparation:

U Turn the control unit off.

U Remove the batteries (see section 6.3).

Tools:

U Torx screwdriver

Steps:

1. Remove the push-button module from the holder and lay it down with the back facing up.

2. Loosen and remove the three Torx screws on the back of the push-button module.

Fig. 49

Back of the push-button module

1 Holes for Torx screws to mount the cover

3. Remove the cover and set it aside.

Skippi Plus

Freely configurable push-button module

for 16 standard icons of the enAble50

Service Work

Ottobock | 43

Table of Contents