Congatec COM Express conga-TR3 User Manual page 78

Feature
Delay
Event 1
Event 2
Event 3
Timeout 1
Timeout 2
Timeout 3
Watchdog ACPI Event
Note
In ACPI mode it is not possible for a "Watchdog ACPI Event" handler to directly restart or shutdown the OS. For this reason the congatec
BIOS will do one of the following:
For Shutdown: An over temperature notification is executed. This causes the OS to shut down in an orderly fashion. For Restart: An ACPI fatal
error is reported to the OS.
Copyright © 2016 congatec AG
Options Description
Disabled Select the delay time before the runtime watchdog becomes active. This ensures that an operating
10sec system has enough time to load.
30sec
1min
2min
5min
10min
30min
ACPI Event Selects the type of event that will be generated when timeout 1 is reached. For more information
Reset about ACPI Event see note below.
Power Button
Disabled Selects the type of event that will be generated when timeout 2 is reached.
ACPI Event
Reset
Power Button
Disabled Selects the type of event that will be generated when timeout 3 is reached.
ACPI Event
Reset
Power Button
1sec Selects the timeout value for the first stage watchdog event.
2sec
5sec
10sec
30sec
1min
2min
5min
10min
30min
see above Selects the timeout value for the second stage watchdog event.
see above Selects the timeout value for the third stage watchdog event.
Shutdown Select the operating system event that is initiated by the watchdog ACPI event. These options
Restart perform a critical but orderly operating system shutdown or restart.
TR33m10 78/105