Fusing Section; Overview - Konica Minolta bizhub 160 Service Manual

12. Fusing section

12. Fusing section

12.1 Overview

• The toner image transferred onto the paper is securely fixed to the paper.
• A heated roller system is used as the fusing system. The paper, to which the toner image
has been transferred, is fed between the Fusing Roller heated by the Fusing Roller
Heater Lamp and the Pressure Roller. This permanently fixes the toner image in the
paper.
Fusing Paper Separator Finger
Thermostat (TS1)
Thermistor
(TH1)
Fusing Roller Heater
Lamp (H1)
Fusing Roller
Electrical Parts
PS1
Electrical Parts
TH1
Electrical Parts
H1
36
Control Signal
PWB-P MPJ8P-3
Control Signal
Low temp.
PWB-P MPJ2P-1
Control Signal
PU-1 CN1PU-1-3
Theory of Operation Ver. 1.0 Apr. 2005
Actuator
Fusing Entrance
Guide Plate
4136M520AA
Blocked Unblocked
L H
High temp.
Analog Input
ON OFF
L H
Exit Sensor
(PS1)
Pressure Roller
WIRING DIAGRAM
B-7
WIRING DIAGRAM
B-7
WIRING DIAGRAM
I-7