Initial Commissioning Using Vector (Chassis) As An Example - Siemens SINAMICS S120 Installation And Start-Up Manual

Commissioning

Initial commissioning using vector (chassis) as an example

3.6 Initial commissioning using vector (chassis) as an
example
The commissioning example described in this section shows all the necessary con-
figuration and parameter settings and testing routines. The commissioning proce-
dure is performed using the STARTER commissioning tool.
Requirements for commissioning
1. The commissioning requirements have been met.
–> see Section 2.1
2. The checklist for commissioning has been completed and all items are O.K.
–> see Section 2.2
3. STARTER is installed and ready to run.
–> see the "read me" file on the STARTER installation CD.
4. The electronics power supply (24 V DC) is switched on.
3-66
E Siemens AG, 2004. All rights reserved
SINAMICS S120 Installation and Start-Up Manual, 12/04 Edition