Siemens SINAMICS S120 Installation And Start-Up Manual page 6

Preface
In the interests of clarity, this documentation does not contain all the detailed infor-
mation for all product types and cannot take into account every possible aspect of
installation, operation, or maintenance.
The contents of this documentation are not part of an earlier or existing agreement,
a promise, or a legal agreement, nor do they change this. All obligations entered
into by Siemens result from the respective contract of sale that contains the com-
plete and sole valid warranty arrangements. These contractual warranty provisions
are neither extended nor curbed as a result of the statements made in this docu-
mentation.
Audience
This documentation is intended for machine manufacturers, commissioning engi-
neers, and service personnel who use the SINAMICS S drive system.
Objective
The Installation and Start-Up Manual describes all the procedures and operational
instructions required for commissioning and servicing SINAMICS S120.
The Installation and Start-Up Manual is structured as follows:
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Advice for beginners:
First read Chapters 1 and 7 and then read the relevant chapters.
In addition to the Installation and Start-Up Manual, you need the List Manual and
the Function Manual.
Finding your way around
To help you find information more easily, the following sections have been included
in the appendix in addition to the table of contents:
1. List of Abbreviations
2. References
3. Index
vi
System Overview
Preparations for Commissioning
Commissioning
PROFIBUS Communication
SINAMICS Safety Integrated
Diagnostics
Basic Information About the Drive System
SINAMICS S120 Installation and Start-Up Manual, 12/04 Edition
E Siemens AG, 2004. All rights reserved