Siemens SINAMICS S120 Installation And Start-Up Manual page 178

SINAMICS Safety Integrated (Booksize)
Acceptance test and certificate
Scope of a complete acceptance test
Documentation (see Subsection 5.7.2)
Machine documentation (including the SI functions)
1. Machine description and overview diagram (see Tables 5-4 and 5-5)
2. SI functions for each drive (see Table 5-6)
3. Description of safety equipment (see Table 5-7)
Functional test (see Subsection 5.7.3)
Check the individual SI functions used
4. "Safe standstill" function, part 1 (see Table 5-8)
5. "Safe standstill" function, part 2 (see Table 5-9)
6. "Safe brake control" function (see Table 5-10)
Completion of certificate (see Subsection 5.7.4)
Record the commissioning procedure and provide countersignatures.
7. Check the Safety parameters.
8. Record the checksums.
9. Verify the data backups.
10.Countersignatures
Appendix
Measurement records for functional test parts 1 and 2.
S Alarm logs
S Trace recordings
5-178
E Siemens AG, 2004. All rights reserved
SINAMICS S120 Installation and Start-Up Manual, 12/04 Edition