Fuel-Air Ratio Curves - Settings And Commissioning; Initial Commissioning - Siemens LMV37.4 Series Basic Documentation

27.11 Fuel-air ratio curves – settings and commissioning

27.11.1 Initial commissioning

/reset
/reset
Building Technologies
P
V h min s
P
V h min s
For initial commissioning, change to the parameter level (refer to chapter Operation).
The settings can then be made on parameter level 400.
P
V h min s
P
V h min s
Basic documentation LMV37.4...
27 Parameter level
The display shows 400: flashing on the left,
SEt appears on the right.
%
An unprogrammed LMV37.4 or a LMV37.4 whose
operating mode has been reset or changed displays
OFF UPr.
%
Press to select parameter 400 for initial
/reset
commissioning and for setting fuel-air ratio control.
%
Press to go to the settings for fuel-air ratio control
/reset
and parameter 201 for selecting the operating mode.
%
201: appears flashing.
199/267
CC1P7546en
17.12.2018