Suzuki DR350 Service Manual page 112

CHASSIS
6· 1 5
ADJ U S T M E N T
After installing the front fork, adjust the s p ri n g p re-load and
damping force as fol lows.
SPRI NG PRE-LOAD ADJUSTMENT
There a re fou r g rooved l ines on the side of the adjuster. Po­
:
sition 0 provides the maximum spring pre-load a n d position
5 provides the m i n i m u m spring pre-load .
Standard setting 3
DAMPING FORCE ADJUSTMENT
Slowly tu rn in the adjuster and find out the adjuster is seat­
ed . From that position , turn back a n d find out first c l i c k ­
that is 1 -position t h e n turn b a c k and c o u n t t h e specified po�
sition as shown below.
Standard setting : Max. - 7
WARNI N G :
B e sure t o adjust the spring pre-load a n d damping force o n
both front fork legs equally.
Position 6