EN G I N E C O M PO N ENTS I N S PECT I O N A N D S ERVI C I N G
CYLI N D E R H EAD C OV E R S ERVI C I N G
CAUTION :
Be sure to identify each removed part as to its location, and
lay the parts out in groups designated as "Exhaust" and "In
•
let" , so that each will be restored to the original location
•
during assembly.
Remove the d e-cam p . cable bracket CD.
•
Remove the de-cam p . shaft
Remove the intake and exhaust rocker arm shaft set bolts .
•
Remove the i ntake and exhaust rocker a rm shafts with
a 6 mm bolt.
l.
CYLI N D E R HEAD COVER D I STO RTI O N
After removing sealant from the fitting surface o f the cyl inder
head cover, place the cylinder head cover on a surface plate
and check for distortion with a thickness gauge. Check
poi nts are shown i n photograph.
Service Limit : 0.05 m m (0.002 in)
If the distortion exceeds the l i mit, repl ace the cyl inder h ead
cover.
0.
ENGINE
3- 1 4