•
M ASTE R CYLI N D ER R E M OVAL A N D
D I SASS E M B L Y
Remove the reservoir tan k mounting bolt.
•
•
Remove the cotter pin and p i n .
Place a cloth u n derneath t h e u nion bolt on the master
cylinder to catch spilled d rops of brake fluid . U nscrew
the union bolt and disconnect the brake hose/master
cylinder joint.
CAUTON :
Completely wipe off any brake fluid adhering to any part of
•
motorcycle . The fluid reacts chemically with paint, plast
lies, rubber materials, etc .
Remove the connector by removin g the circ l i p CD with
:
the special too l .
•
09900-061 08
Snap ring pliers
Remove the O-ring @.
•
•
Remove the d ust boot .
:
Remove the circlip with the specia l too l .
09900-06 1 08
Snap ring pliers
•
Remove the rod @ , pisto n/primary cup
@
a n d s pring ® .
CHASSIS 6·26