Printer Controller Service Mode; Bit Switch Programming; Service Mode Menu ("1. Service Menu") - Ricoh S-P2 Service Manual

Printer Controller Service Mode

Bit Switch Programming

1. Enter the sp mode, select "Service Menu", then press [Enter] twice.
2. Select #1, #2, #3, or #4 for the desired bit switch, then press [Enter].
• [] []: Move to the next switch.
3. Adjust the bit switch using the following keys.
• [] []: Move to the next bit.
• [Escape]: Exit without saving changes.
• [Enter]: Exit and save changes.
• The left digit on the display is bit 7 and the right digit is bit 0.
4. Press [Enter] to save changes and exit.

Service Mode Menu ("1. Service Menu")

1001 Bit Switch
001 Bit Switch 1
bit 0 DFU
bit 1 DFU
bit 2 DFU
bit 3 No I/O Timeout
Enables/Disables MFP I/O Timeouts. Enabled: The MFP I/O Timeout setting will have
no affect. I/O Timeouts will never occur.
bit 4 SD Card Save Mode
Enabled: Print jobs will be saved to an SD Card in the GW SD slot (* "Card Save
Function" in the service tables of Field Service Manual).
bit 5 DFU
bit 6 DFU
bit 7 [RPCS,PCL]: Printable area frame border
Printer Controller Service Mode
0 1
- -
- -
- -
0: Disable 1: Enable
0: Disable 1: Enable
- -
- -
0: Disable 1: Enable
5
83