Ricoh S-P2 Service Manual page 117

1
2
3
4
5
6
7
Complexity Opt1
Use this SP to set the conditions for password entry to access the local address book.
Specifically, this SP limits the password entry to upper case and sets the length of the
password.
5846 062
[0 to 32/0]
Note:
• This SP does not normally require adjustment.
• This SP is enabled only after the system administrator has set up a group password
policy to control access to the address book.
Complexity Opt 2
Use this SP to set the conditions for password entry to access the local address book.
Specifically, this SP limits the password entry to lower case and defines the length of the
password.
5846 063
[0 to 32/0]
Note:
• This SP does not normally require adjustment.
• This SP is enabled only after the system administrator has set up a group password
policy to control access to the address book.
Complexity Opt 3
Use this SP to set the conditions for password entry to access the local address book.
5846 064
Specifically, this SP limits the password entry to numbers and defines the length of the
password.
[0 to 32/0]
Japan Only
--- Not Used ---
--- Not Used ---
--- Not Used ---
--- Not Used ---
Printer Engine Service Mode
5
115