Ricoh S-P2 Service Manual page 181

Toner coverage is 5% more than normal. The machine detects toner near end based on main
[B]
motor rotation before the toner end sensor detects that toner is low.
Toner coverage is 5% lower than normal. The machine detects toner near end based on main
[C] motor rotation before the toner end sensor detects that toner is low. The toner overflow prevention
mechanism is triggered before toner is completely exhausted.
"Replace Print
Ê
Cartridge Soon"
"Replace Print
Cartridge" flashes
Ë
and alternates with
"Ready".
Displays at toner near-end (based on the toner end sensor), or when the
print cartridge is near the end of its service life (based on main motor
rotation).
Printing can continue but print quality is not guaranteed.
The print cartridge is at the end of its service life (about 200 pages or
more after near end is detected by main motor rotation) but some toner
still remains (toner end sensor did not detect toner end).
Printing can continue but print quality is not guaranteed.
This condition will occur if an old AIO is refilled with toner. The grey area
in the diagram is marked 'out of guaranteed range' because Ricoh cannot
guarantee the operation of the machine if an old AIO is refilled with toner.
Printing Process
6
179