Ricoh S-P2 Service Manual page 65

For more details about this SC 833, SC834 error, execute SP5990 to print an SMC report so you can
read the error code. The error code is not displayed on the operation panel. The additional error codes
(0F30, 0F31, etc. are listed in the SMC report.
829 B
SC 833, 835
RTB 14
838 D
SC842
RTB 14a
851 B
853 B
854 B
855 B
Self-diagnostic Error: Optional RAM
The optional RAM returned an error during
the self-diagnostic test.
Self-diagnostic Error: Clock Generator
A verify error occurred when setting data
was read from the clock generator via the
I2C bus.
IEEE 1394 I/F error
Driver setting incorrect and cannot be
used by the 1394 I/F.
Wireless LAN Error 1
During machine start-up, the machine can get
access to the board that holds the wireless LAN,
but not to the wireless LAN card (802.11b or
Bluetooth).
Wireless LAN Error 2
During machine operation, the
machine can get access to the board
that holds the wireless LAN, but not to
the wireless LAN card (802.11b or
Bluetooth).
Wireless LAN error 3
An error was detected on the wireless
LAN card (802.11b or Bluetooth).
• Replace the optional memory board
• Controller board defective
• Replace the controller board
• NIB (PHY), LINK module defective;
change the Interface Board
• Controller board defective
• Wireless LAN card missing (was
removed)
• Wireless LAN card missing (was removed)
• Wireless LAN card defective
• Wireless LAN card connection incorrect
Service Call Conditions
4
63