Ricoh S-P2 Service Manual page 73

1st/2nd Message
Hardware Problem, Wireless Card
Invalid Data, Power Off On
Invalid Password, Try again
Load Correct Size Paper/ Paper Size:,
Paper Type:
Load Paper: Tray# or Form Feed
Menu Protected, Cannot change
Misfeed: Duplex Check paper size/
Open Duplex Unit cover
Misfeed: Internal, Check paper size/
Open Front Cover
Misfeed: Ppr, Exit Check paper size/
Open Paper Exit Cover
Misfeed: Ppr. Tray, Check paper size/
Pull out Tray
No Files exist
Problem/Solution
Machine failed to access IEEE 802.11a/g board.
• Confirm that the board is installed correctly.
Machine has received spurious data.
• Turn the printer off/on.
The invalid password was entered and Locked Print or Saved
File Print is not applicable.
Invalid password entered, Locked Print or Saved File Print
cannot apply.
Printer displays this message for 4 sec., then returns to previous
display.
• Enter correct password.
Size of paper selected does not match size selected with dial
on paper tray.
• Use the dial to select the correct paper size.
-or-
• Press [Form Feed].
The specified tray is out of paper.
• Load paper in the specified tray.
The operation panel has been digitally locked, settings cannot
be changed. Message displays for 5 sec., returns to previous
display.
Paper fed from bypass tray jammed in duplex unit.
Paper fed from bypass tray jammed in duplex unit.
Paper fed from bypass tray jammed in duplex unit.
Paper is jammed in the duplex unit.
No files available for deleting or printing. This error displays
for 3 sec., then machine returns to previous display.
Error Messages
4
71