Ricoh S-P2 Service Manual page 67

During HDD operation, the HDD cannot respond to
an CRC error query. Data transfer did not execute
normally while data was being written to the HDD.
HDD access error
865 D
HDD responded to an error during operation for a
condition other than those for SC863, 864.
SD card error 1: Confirmation
The machine detects an electronic license error in the application on the SD card in the
controller slot immediately after the machine is turned on. The program on the SD card
866 B
contains electronic confirmation license data. If the program does not contain this license
data, or if the result of the check shows that the license data in the program on the SD
card is incorrect, then the checked program cannot execute and this SC code is displayed.
• Program missing from the SD card
• Download the correct program for the machine to the SD card
SD card error 2: SD card removed
The SD card in the boot slot when the
867 D
machine was turned on was removed
while the machine was on.
SD card error 3: SC card access
868 D
An error occurred while an
SD card was used.
Address book data error
Address book data on the hard disk was
detected as abnormal when it was accessed
B
870
from either the operation panel or the
network. The address book data cannot be
read from the HDD or SD card where it is
• Insert the SD card, then turn the machine
off and on.
• SD card not inserted correctly
• SD card defective
• Controller board defective
• Note: If you want to try to reformat the SC card, use
SD Formatter Ver 1.1.
• HDD defective.
• Initialize the HDD with SP5832. If
this does not solve the problem,
Service Call Conditions
• HDD defective
• HDD defective.
4
65