Machine Installation - Ricoh S-P2 Service Manual

1. Installation

Machine Installation

Refer to the following sections of the "Operating Instructions" for installation details for all models.
1
Main unit
Paper Feed Unit G894
Envelope Feeder G362
Duplex Unit G893
Memory Unit Type G 128 MB M354
Memory Unit Type G 256 MB D362
Hard Disk Drive Type 2670 M352
IEEE 802.11a/g interface Unit Type L
M344 (NA) *1
Options
IEEE 802.11a/g interface Unit Type M M344 (EU)
*1
IEEE 1284 Interface Board Type A B679
Gigabit Ethernet Board Type A G874 *1
VM Card Type K M354
Data Storage Card Type A G874
Data Overwrite Security Unit Type L M352
SD Card for Netware Printing Type B M352
Drivers
*1: These units cannot be installed at the same time.
14
-
-
Quick Installation Guide
Paper Feed Unit TK1030
Envelope Feeder Type400
AD1000 (Duplex Unit)
Hardware Guide, Section 2
Software Guide, Section 6
Section 1 of the Software Guide