Ricoh S-P2 Service Manual page 76

4. Troubleshooting
1st/2nd Message
SD authentication failed
SD card not set, Contact admin.
SSID not entered
Supply order
failed.
4
Update Mode Err, Power Off On
74
Problem/Solution
Authentication from the SD card failed.
• Turn the machine off/on.
The SD card for DOS is not set.
This message confirms that no ID has been entered. Enter
correct ID
Call for supply order has failed.
• Confirm the setting of @Remote.
The printer has failed to restart the update.
• Turn the machine off/on.