Printer Service Mode - Ricoh MP C307 Field Service Manual

Printer Service Mode

1001
001 Bit Switch 1
bit DFU
0
bit Responding with the hostname as the
1 sysName
This BitSwitch can change the value of the sysName.
0 (default): Model name (PnP name) such as "MP C401SP"
1: Host name
bit DFU
2
bit No I/O Timeout
3
Enables/Disables MFP I/O Timeouts. If enabled, the MFP I/O Timeout setting will have no affect.
I/O Timeouts will never occur.
bit SD Card Save Mode
4
If this bit switch is enabled, print jobs will be saved to the GW SD slot and not output to paper.
bit [PS and PDF] Paper size error margin
5
When a PS job is printed by using a custom paper size, the job might not be printed because of a
paper size mismatch caused by a calculation error. By default, the error margin for matching to a
paper size is ±5 points. By enabling this BitSwitch, the error margin for matching to a paper size
can be extended to ±10 points.
bit Color balance switching
6
This BitSwitch can be used to restore the color balance to match that of previous models. If this
BitSwitch is set to "1" (Enabled), the color balance that is equivalent to Fuji-Xerox printers will be
used.
bit DFU
7
1001
002 Bit Switch 2
bit Color balance switching
0
This BitSwitch can be used to restore the color balance to match that of previous models. If this
BitSwitch is set to "1" (Enabled), the color balance from 09S and earlier models will be used.
bit DFU
1
bit DFU
2
Bit Switch
0
-
Model name (PnP name)
-
Disabled
Disabled
±5pt
Disabled
-
Bit Switch
0
Disabled
-
-
3.SP Mode Tables
1
-
Hostname
-
Enabled
Enabled
±10pt
Enabled
-
1
Enabled
-
-
355