Ricoh S-P2 Service Manual page 124

5. Service Tables
5869 RAM Disk Setting
This SP enables and disables email sending and receiving. This setting determines the size
of the RAM disk (MB) that the machine uses to manage email sending and receiving.
[0 to 1/0/1]
5869 001
0: Use. Allocates 46 MB for sending and 8 MB for receiving.
1: Do not use
Adjusts the RAM Disk size for the PDL storage.
5869 002
[0 to 255 / 4 / 1]
5
Common KeyInfo W(riting)
Writes to flash ROM the common proof for validating the device for @Remote
specifications.
Note:
5870
5870 001 Writing
5870 003 Initialize
SDCardAppliMove
5873
Allows you to move applications from one SD card another. For more, please refer to the
"SD Card Application Move" section.
5873 001 MoveExec
5873 002 UndoExec
Option Setup
5878
Press [#Enter] to initialize the Data Overwrite Security option.
ROM update
5886
122
[0to1/0/1]
• These SP settings are required to connect @Remote or must also be set after the
board is replaced.
• Even if @Remote is not connected, these settings are used for Web validation, so at
least SP5870 003 must be enabled.
Writes the authentication data (used for NRS) in the memory.
Initializes the authentication data in the memory.
Executes the move from one SD card to another.
This is an undo function. It cancels the previous execution.
Data Overwrite Security (DOS) Setup