Ricoh S-P2 Service Manual page 120

5. Service Tables
Erases all debug logs on the SD Card. If the card contains only debugging files generated
by an event specified by SP5858, the files are erased when SP5857 010 or 011 is
executed.
To enable this SP, the machine must be cycled off and on.
FreeSpaceonSD
5857 013
Displays the amount of space available on the SD card.
SD to SD (4MB)
5857 014
Copies the last 4MB of the log (written directly to the card from shared memory) onto an
SD card.
SD to SD (Any)
5857 015
5
This SP copies the log on an SD card (the file that contains the information written directly
from shared memory) to a log specified by key number.
Make SD LogFile
5857 017
This SP creates a 4 MB file to store a log on an SD card.
Debug Save When
5858
These SPs select the content of the debugging information to be saved to the destination.
Refer to Section 4 for a list of SC error codes.
5858 001 EngineSC Error
5858 002 SystemSC Error
5858 003 Any SC Error
5858 004 Jam
5859 LogSaveKey No.
5859 001 Key 1
5859 002 Key 2
5859 003 Key 3
5859 004 Key 4
5859 005 Key 5
118
Stores SC codes generated by copier engine errors.
Stores SC codes generated by GW controller errors.
[0 to 65535/0/1]
Stores jam errors.
These SPs allow you to set up to 10 keys for log files for
functions that use common memory on the controller board.
[-9999999 to 9999999/0/1]