Printer Controller Service Mode - Ricoh J-P2 Service Manual

17 January, 2003

5.3 PRINTER CONTROLLER SERVICE MODE

5.3.1 SERVICE MODE MENU
The printer controller service mode is displayed as follows:
• "1. Service" ...... Without the optional CF expander
• "Printer SP"...... With the optional CF expander
Mode No.
1
(Class 1 and 2)
001 [Bit Switch]
1 Bit Switch 1
2 Bit Switch 2
3 Bit Switch 3
4 Bit Switch 4
5 Bit Switch 5
6 Bit Switch 6
7 Bit Switch 7
8 Bit Switch 8
003 [Clear Setting]
1 Clear Setting
2 Clear CSS Counter
004 [Print Summary]
1 Print Summary
005 [Disp. Version]
1 Disp. Version
101 [ToneCtlSet]
1 Tone (Factory)
2 Tone (Prev.)
3 Tone (Current)
4 ACC
[ToneCtlSet]
102
1 *1200x1200Photo
2 600x600Text
3 1200x600Text
4 600x600Photo
5 1200x600Photo
[PrnColorSheet]
103
1 ToneCtlSheet
2 ColorChart
104 [ToneCtlValue]
1 Black 1
21 Cyan 1
41 Magenta 1
61 Yellow 1
2 Black 2
22 Cyan 2
42 Magenta 2
62 Yellow 2
3 Black 3
23 Cyan 3
43 Magenta 3
63 Yellow 3
PRINTER CONTROLLER SERVICE MODE
Function / [ Setting ]
*CTL Adjusts bit switch settings. DFU
Initializes settings in the "System" menu of the
user mode.
CF DFU
Prints the service summary sheet (a summary of
all the controller settings).
Displays the version of the controller firmware.
*CTL Recalls a set of gamma settings. This can be
either a) the factory setting, b) the previous
setting, or c) the current setting.
CF
Selects the printing mode (resolution) for the
printer gamma adjustment. When selecting a print
mode, an asterisk (*) is displayed in the front of
the mode.
Prints the test page to check the color balance
before and after the gamma adjustment.
*CTL Adjusts the printer gamma for the mode selected
in the "Mode Selection" menu.
[ 0 to 255 / 16 / 1/step ]
*CTL [ 0 to 255 / 32 / 1/step ]
*CTL [ 0 to 255 / 48 / 1/step ]
5-9