Ricoh S-P2 Service Manual page 69

876 D
SC 877
RTB 14
880 B
SC899
RTB 14a
900 D
920 B
SC 921, 955
RTB 14
990 D
991 C
Note: The source of this error is the
Data Overwrite Security Unit B660
running from an SD card.
Log data abnormal
An error was detected in the handling
of the log data at power on or during
machine operation. This can be caused
by switching the machine off while it is
operating.
File Format Converter (MLB) error
A request to get access to the MLB was
not answered within the specified time.
Electrical total counter error
The total counter contains something
that is not a number.
Printer error 1
An internal application error was
detected and operation cannot
continue.
Software error 1
The software performs an unexpected
function and the program cannot
continue.
Software error 2
• Software error. Update the firmware
• NVRAM defective
• HDD defective
• MLB defective, replace the MLB
• NVRAM incorrect type
• NVRAM defective
• NVRAM data scrambled
• Unexpected error from external source
• Software defective; turn the machine off/on, or
change the controller firmware
• Insufficient memory
Software defective, re-boot*1
Service Call Conditions
4
67