Table of Contents
Advertisement
1 October, 1999
4.3 PRINTER CONTROLLER SERVICE MODE
Service Mode Table (Service Menu 1)
Title
A
BitSw#1 Set
B
BitSw#2 Set
C
BitSw#3 Set
D
BitSw#4 Set
E
NVRAM Clear 1
F
NVRAM Clear 2
G
NVRAM Clear 3
H
Counter Clear
I
Diag Error
J
Vender Maker
K
Service Print
4.3.1 BIT SWITCH PROGRAMMING
1. Enter the SP mode and select "1.Service Menu1."
2. Select A, B, C, or D for the desired bit switch, then press [Enter].
3. Press [Enter] in the "Bit Switch Set" menu.
4. Adjust the bit switch using the following keys.
• [ ] [ ]: Move to the next bit.
• [Escape]: Exit without saving changes.
• [Enter]: Exit and save changes.
5. Press [Enter] to save changes and exit.
BIT SWITCHES
NOTE: Currently the bit switches are not being used.
PRINTER CONTROLLER SERVICE MODE
Description
Adjusts bit switch settings.
Note: Currently, the bit switches are not being used.
Initializes the controller NVRAM except bit switches,
NIB settings, and log data.
Initializes the NVRAM on the controller.
Initializes the NVRAM on the NIB.
Initializes all counters to zero.
Displays diagnostics error codes on the LCD.
Selects the vender name.
Prints the service summary sheet.
4-5
Advertisement
Table of Contents
