Pressure Roller - Ricoh S-P2 Service Manual

6. Details

Pressure Roller

6
To change the applied pressure (for example, if the customer complains of insufficient fusing), adjust the
position of the pressure springs [B]. The factory setting for the spring position is at the top (minimum pressure).
The envelope lever [A] is used by the operator to adjust the size of the gap between the pressure roller
and hot roller. A larger gap is needed for envelopes, which are thicker than paper.
• Raise the lever
prevents jams and wrinkling when printing on envelopes.
• Lower the lever
190
to increase the size of the gap between the hot roller and pressure roller. This
to reduce the gap for all other print jobs. Normally this lever should be down.